Francia Francia Español Español EnglishEnglish Português Português Русский Русский
Wuxi Hai Roll Fone Science & Technology Co.,Ltd.
Home » Products » Stud and Track Forming Machine
Stud and Track Forming Machine

Stud and Track Forming Machine

1. The stud and track forming machine produces studs and tracks.
2. The thickness can usually be formed at 0.25-1.2mm.
3. The whole line speed of the stud and track forming machine can be reached at 40m/min or more.
4. If you need higher efficiency, we recommend you use the flying shear with no-stop.

The products of the stud and track forming machine are used as the supporters in ceilings, roofing, wall construction, etc.

Flow Chart

1. Uncoiler
2. Material inlet
3. Roll forming apparatus
4. Cutting device
5. Product run out table

Technical Specifications

Model YD-50-152
Number of Stations 17 stations
Thickness 0.3-1.2mm
Main Power 7.5Kw
Dimensions Appro×6m*0.8m*0.75m
Forming Speed 15-30m/min
Dimension Chart

The stud and track forming machine consists of a passive or hydraulic single or double head uncoiler, roll forming machine unit, hydraulic automatic cutting unit, PLC automatic control cabinet and product run out table.


Model YD-50-152
Decoiler Material # 45 Steel Material
Roll Forming Material #45 Steel base / 40CR Steel HRC 48-52 Roller
Cutting Material Cr12 Quenched 58-62
Punching Material Cr12 Quenched 58-62 or Cr15 Bearing Steel
PLC PLC Panasonic →Touch screen Made in Taiwan.→ Transducer Yaskawa →Encoder Omron
Bearing National Brand

Equipment Maintenance
Meticulous daily maintenance plays an important part in extending the stud and track forming machine's operation time and the quality of the rolling plank. The following steps should be part of the machine's daily production and usage routine.
1. Regularly lubricate the outside parts of the stud and track forming machine, i.e., driving chain, etc.
2. Regularly wipe the surface of roller, particularly when working outside. If you do not use the machine a long time of time, you should daub lube in the roller surface. Make sure you clean it the next time you use the machine.
3. If the stud and track forming machine is not used for a long period of time, make sure you cover it with plastic or cloth. Avoid getting rain on the machine or the machine becoming damp, especially the electric control box.
4. Make sure the cutting system is lubricated when necessary.
5. Check the hydraulic station often and the oil quantity of the deceleration machines. Add more oil if the oil level is low.
6. Check the electric appliances box and every leads conjunction circumstance of the stud and track forming machine. Dust the machine often.

The stud and track forming machine is wrapped and covered with film making the package seaworthy. The legs of the machine are fixed with angle steel and heavy screws.

Sample Products

Other Products

Hai Roll Fone is a China-based stud and track forming machine manufacturer and supplier. We offer stud and track forming machines, roofing tile roll forming machines, square pipe roll forming machines, etc. Our high quality products are offered at competitive prices. We can supply the full chain of manufacturing cut to length lines and downspout pipe forming machines right here in China. Our lower manufacturing cost saves your purchasing cost. More details on each of our products are shown on the description page.